Baumer OADM 20I5560/S14C Manuel de l'utilisateur - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Baumer OADM 20I5560/S14C. Baumer OADM 20I5560/S14C 30 pages. Laser distance sensor
Également pour Baumer OADM 20I5560/S14C : Manuel (2 pages)
Imprimer la page
Steps / edges:
When measuring right next to steps / edges, it is important that the receiving beam is not covered by the
steps / edges. This also applies to depth measurements of holes or valleys.
Mounting above shiny surfaces:
On shiny surfaces, it is important that no direct reflection can get to the receiving optics. The reflection could
blind the sensor and produce poor results. To prevent this, the sensor may be slightly tilted. The direct
reflection can be seen on a white piece of paper when held in front of the receiver.
10 -15°
Mounting above round, shiny surfaces:
BA_OADM20x5.doc ANW_81253059
19/30
Baumer
03.07.2017
Frauenfeld, Switzerland