Baumer ENCODERmaster Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Baumer ENCODERmaster. Baumer ENCODERmaster 15 pages.

4.2

Connection of an encoder to the BiSS Adaptor

Use the programming cable included in the delivery to connect the encoder to the BiSS Adaptor. The

programming connector of the encoder is located under the locking screw on the encoder housing.

ATTENTION: When using an encoders with cable outlet (-5), the loose wires must not build contact to

eachother, otherwise no programming can be done!

Figure 9: Connection of encoder to BiSS Adaptor

HB EncoderMaster E V1.00.xx rev04.doc

10/15

Baumer Electric AG

09.07.08/wer

Frauenfeld, Switzerland