Baumer Hubner Berlin PMG10 Manuel d'utilisation - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Baumer Hubner Berlin PMG10. Baumer Hubner Berlin PMG10 44 pages. Absolute encoder
Également pour Baumer Hubner Berlin PMG10 : Instructions de montage et d'utilisation (32 pages), Instructions de montage et d'utilisation (32 pages)
Imprimer la page
6
|
Electrical installation
6.8
Electrical connection with radial terminal boxes
6.8.1
Connecting the supply cable
NOTICE
Equipment damage due to dust or moisture
Inappropriate cable diameters may entail ingress of dust or moisture. In this case, the protection
class is no longer ensured causing device failure or malfunction.
a) Use only appropriately sized cables to make sure the specified protection class is being en-
sured.
INFO
Connection cables are not included in delivery.
1
6
Ill. 10: Connecting the supply cable
1
3
5
Tools
t20
n
n
Instruction:
a) Loosen the screws at the terminal box.
b) Lift the terminal box off the encoder.
c) Loosen the cable gland at the terminal box.
24
2
3
Torx / slotted screw M4x32 mm
Terminal connector (wire cross-section
2
≤ 1.5 mm
)
Additional incremental output (optional),
speed switch (optional), programming
interface (PMG10P only)
Supply cables (cable diameter 5-13
mm)
22 mm
Operating Manual
5
2
4
6
4
Terminal box cover
Cable shield
Cable gland M20x1.5 mm (for cable di-
ameter 5-13 mm)
PMG10 & PMG10P SSI | V1
Baumer Hübner