Douglas Dynamics 35217 Manuel d'instructions d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Douglas Dynamics 35217. Douglas Dynamics 35217 8 pages. Mount kit for kawasaki mule sx utv 2017-

Imprimer la page

11. Install a 3/8" x 1‑1/2" cap screw through

each outer skid plate assembly hole and through

the brush guard. Place a square washer and

a 3/8" washer on each cap screw and hand tighten.

Skid Plate Assembly

12. Check that the skid plate assembly is still centered

on the frame. Adjust if necessary. Tighten all

fasteners according to the torque chart.

13. Install each receiver with two 1/2" pins and

two 1/8" hairpin cotters.

NOTE: After five to ten hours of snowplow usage,

retorque all mount assembly fasteners.

Lit. No. 79257, Rev. 00

3/8" x 1‑1/2"

Cap Screw

Brush Guard

Square Washer

3/8" Locknut

35217

April 15, 2022