Douglas Dynamics 35217 Manuel d'instructions d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Douglas Dynamics 35217. Douglas Dynamics 35217 8 pages. Mount kit for kawasaki mule sx utv 2017-
Imprimer la page35217
6. Place the skid plate assembly against the brush
guard and secure with two 3/8" x 1‑1/2" cap screws
through the upper skid plate assembly holes,
the brush guard, and the brackets. Place
a 3/8" washer and a 3/8" locknut on each cap screw
and hand tighten.
3/8" x 1‑1/2"
Cap Screws
Skid Plate
Assembly
3/8" Washers and
Brackets
7.
Place two 3/8" x 1‑1/2" cap screws through the
lower skidplate assembly holes, the brush guard,
and the brackets. Place a 3/8" washer and a
3/8" locknut on each cap screw and hand tighten.
3/8" x 1‑1/2"
Cap Screws
Lit. No. 79257, Rev. 00
Brush Guard
3/8" Locknuts
8. Center the skid plate assembly on the frame. Tighten
the four cap screws and locknuts only enough that
the skid plate assembly does not move.
9. If an OEM plastic skid plate is present,
drill eight 3/8" holes using the existing holes in the
rear of the steel skid plate assembly as templates.
Skid Plate
Assembly
Holes
10. Place the four 3/8" U‑bolts over the frame rails
and through the skid plate assembly. Place
eight 3/8" locknuts on the U‑bolts and hand tighten.
3/8" U‑Bolts
3/8" Locknuts
6
April 15, 2022