- ページ 6

自動車アクセサリー Douglas Dynamics 35217のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Douglas Dynamics 35217 8 ページ。 Mount kit for kawasaki mule sx utv 2017-

35217

6. Place the skid plate assembly against the brush

guard and secure with two 3/8" x 1‑1/2" cap screws

through the upper skid plate assembly holes,

the brush guard, and the brackets. Place

a 3/8" washer and a 3/8" locknut on each cap screw

and hand tighten.

3/8" x 1‑1/2"

Cap Screws

Skid Plate

Assembly

3/8" Washers and

Brackets

Place two 3/8" x 1‑1/2" cap screws through the

lower skidplate assembly holes, the brush guard,

and the brackets. Place a 3/8" washer and a

3/8" locknut on each cap screw and hand tighten.

3/8" x 1‑1/2"

Cap Screws

Lit. No. 79257, Rev. 00

Brush Guard

3/8" Locknuts

8. Center the skid plate assembly on the frame. Tighten

the four cap screws and locknuts only enough that

the skid plate assembly does not move.

9. If an OEM plastic skid plate is present,

drill eight 3/8" holes using the existing holes in the

rear of the steel skid plate assembly as templates.

Skid Plate

Assembly

Holes

10. Place the four 3/8" U‑bolts over the frame rails

and through the skid plate assembly. Place

eight 3/8" locknuts on the U‑bolts and hand tighten.

3/8" U‑Bolts

3/8" Locknuts

April 15, 2022