Baumer HUBNER BERLIN PROFI NET microGen HMG10P Manuel d'utilisation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Baumer HUBNER BERLIN PROFI NET microGen HMG10P. Baumer HUBNER BERLIN PROFI NET microGen HMG10P 44 pages. Incremental encoder with magnetic sensing
Également pour Baumer HUBNER BERLIN PROFI NET microGen HMG10P : Instructions de montage et d'utilisation (32 pages), Instructions de montage et d'utilisation (40 pages)
Imprimer la page
5
|
Installation
1
Blind hollow shaft or cone shaft with
wrench flat SW 17 mm
3
Torx/slotted head screw M4x10 mm (DIN
7964)
5
Spring washer 6 (DIN 7980)
7
Torque arm
9
Cheese-head screw M6x8 mm for
grounding strap (ISO 1207)
11 Washer B6.4 (ISO 7090)
13 Self-locking nut M6 (ISO 10511)
15 Threaded rod M6 (variable length ≤ 210
mm)
Tool
5 mm
n
n
20 mm
n
1,6×8 mm
n
Measuring gauge
n
Instruction:
a) Verify drive shaft about any concentricity error (see further links).
b) Mount the encoder in a way ensuring the electrical connection is protected against water
ingress.
c) Loosen the encoder cover.
d) Apply grease onto the drive shaft.
e) Mount the encoder using cheese-head screw and spring washer. For doing so, tighten the
screw with a torque of 3-4 Nm and secure with wrench if necessary.
18
16
15
11
10 mm, 17 mm
Operating Manual
1
14
13
12
10
9
8
7
6
2
Cover
4
Cheese-head screw M6x30 mm (ISO
4762)
6
Self-locking nut M6 (ISO 10511)
8
Washer B6.4 (ISO 7090)
10 Washer B6.4 for grounding strap (ISO
7090)
12 Washer B6.4 (ISO 7090)
14 Grounding strap
16 Self-locking nut M6 (ISO 10511)
2
3
5
4
HMG10 & HMG10P EtherNet/IP | V1, T1
Baumer Hübner