Douglas Dynamics Fisher Minute Mount 2 XLS 50810 Manuel d'instructions d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Douglas Dynamics Fisher Minute Mount 2 XLS 50810. Douglas Dynamics Fisher Minute Mount 2 XLS 50810 17 pages. Snowplow

Imprimer la page

50600, 50810

6. Stand the blade and A-frame upright and support

in a level position using block under the main

A-frame tube. Install the blade guides.

5/16" Locknut

Lock

Washer

7/16" Nut

Install a 3/8" U-bolt through a link in one end of

the lift chain. Attach U-bolt and chain to the holes

on the driver-side A-frame brace with 3/8" lock

washers and nuts. Tighten.

U-Bolt

Lift Chain

Lock Washers

Nuts

Lit. No. 50579, Rev. 02

Blade Guide

Bracket

5/16" x 1" Cap Screw

8. Place a U-bolt on the extension spring. Attach

a 3/8" nut on each side of the U-bolt. Insert the

U-bolt through the mounting tab on the A-frame.

Place lock washers and 3/8" nuts on the U-bolt

and tighten.

U-Bolt

Lock Washers

Nuts

9. Remove the support block from under the A-frame

and lower the A-frame to the ground, again

placing it on the carton sleeve.

Extension

Spring

U-Bolt

Nut

Mounting Tab

Lock Washer

Nut

Extension Spring

Nuts

April 15, 2010