Douglas Dynamics Fisher Minute Mount 2 XLS 50810 Manual de instrucciones de instalación - Página 6
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para automóviles Douglas Dynamics Fisher Minute Mount 2 XLS 50810. Douglas Dynamics Fisher Minute Mount 2 XLS 50810 17 páginas. Snowplow
Imprimir página50600, 50810
6. Stand the blade and A-frame upright and support
in a level position using block under the main
A-frame tube. Install the blade guides.
5/16" Locknut
Lock
Washer
7/16" Nut
7.
Install a 3/8" U-bolt through a link in one end of
the lift chain. Attach U-bolt and chain to the holes
on the driver-side A-frame brace with 3/8" lock
washers and nuts. Tighten.
U-Bolt
Lift Chain
Lock Washers
Nuts
Lit. No. 50579, Rev. 02
Blade Guide
Bracket
5/16" x 1" Cap Screw
8. Place a U-bolt on the extension spring. Attach
a 3/8" nut on each side of the U-bolt. Insert the
U-bolt through the mounting tab on the A-frame.
Place lock washers and 3/8" nuts on the U-bolt
and tighten.
U-Bolt
Lock Washers
Nuts
9. Remove the support block from under the A-frame
and lower the A-frame to the ground, again
placing it on the carton sleeve.
6
Extension
Spring
U-Bolt
Nut
Mounting Tab
Lock Washer
Nut
Extension Spring
Nuts
April 15, 2010