Asus AP3000 Manuel de référence du matériel - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel de référence du matériel pour {nom_de_la_catégorie} Asus AP3000. Asus AP3000 42 pages. Dual pentium ii server platform
Imprimer la page
• 4-3. Motherboard
You can remove the extended expansion card guide before installing or re-
moving the motherboard. All screws are necessary to provide the needed
stabilization to support all the motherboard expansion cards used in this chas-
sis.
Place and tighten three captive nuts in
the corner locations circled.
20
IV. Hardware Setup
AP 3000 Hardware Reference Guide
Motherboard
Spacers
Place four spacers in the ar-
eas circled on the chassis.
Extended Expansion Card Guide
Spacer
Install the
Baseboard
A metal baseboard is required to add
stability to the motherboard. A rub-
ber pad is placed between the metal
board and motherboard to provide
insulation to prevent shorting. Align
the rubber pad over the metal base-
board so that the holes match. Align
the XG-DLS motherboard over the
rubber pad and metal baseboard so
that the screws match up with the
motherboard's screw holes.
Motherboard
Screws
Place nine screws in the areas
circled on the motherboard. The
four screws used with the
motherboard spacers are longer
than the others. (See page 22 for
samples.) Be careful not to over-
tighten the screws. Doing so may
damage your motherboard.