Asus AP3000 Manuel de référence du matériel - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel de référence du matériel pour {nom_de_la_catégorie} Asus AP3000. Asus AP3000 42 pages. Dual pentium ii server platform
Imprimer la page
• 4-4. Central Processing Unit (CPU)
The motherboard has two connectors for processor retention modules. One
retention module can have one Xeon processor installed. Before installing
the CPU, secure the motherboard on the rubber pad and metal baseboard.
(See p. 20.)
When only one processor is used, the other Slot 2 connector must be termi-
nated with the provided front side bus termination module.
For memory installation, refer to the motherboard User's Manual.
Single Dot
22
IV. Hardware Setup
Captive Nut
Long Screw (aligned with spacers)
Short Screw
Two Dots
AP 3000 Hardware Reference Guide
Install Retention
Mechanisms
For the retention mechanism,
there is a left and a right side. The
left side has a single dot and the
right side has two dots (when
holding the motherboard with the
ATX connectors to the left). Place
the retention mechanisms' holes
over the screws and the Slot2.
Screw four captive nuts onto the
screws as circled in the picture on
the right. Do not place the other
captive nuts yet.
Install Retention
Mechanism
Brace Bars
Place the retention mecha-
nism brace bar into the groove
on the top of the retention
mechanism as shown.
Retention Mechanism Brace Bar