Baumer SXC10 Manuel de l'utilisateur - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Baumer SXC10. Baumer SXC10 48 pages. Sxc series cameralink cameras with truesense imaging sensors
Également pour Baumer SXC10 : Manuel de démarrage rapide (2 pages)

Imprimer la page
Baumer SXC10 Manuel de l'utilisateur

User Sets

8.6.
Three user sets (1-3) are available for the Baumer cameras of the SXC series. The user 
sets can contain the following information:
Parameter
Binning Mode
CameraLink
Control
®
Defectpixellist
Digital I/O Settings
Exposure Time
Gain Factor
Look-Up-Table
These user sets are stored within the camera and and cannot be saved outside the de-
vice.
By employing a so-called "user set default selector", one of the three possible user sets 
can be selected as default, which means, the camera starts up with these adjusted pa-
rameters.
8.7.

Factory Settings

The factory settings are stored in an additional parametrization set which is used by de-
fault. This settings are not editable.
Parameter
Mirroring Control
Offset
Partial Scan
Pixelformat
Readout Mode
Testpattern
Trigger Settings
37