Baumer SXC10 Kullanıcı Kılavuzu - Sayfa 37

Dijital Kamera Baumer SXC10 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Baumer SXC10 48 sayfaları. Sxc series cameralink cameras with truesense imaging sensors
Ayrıca Baumer SXC10 için: Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

User Sets

8.6.

Three user sets (1-3) are available for the Baumer cameras of the SXC series. The user

sets can contain the following information:

Parameter

Binning Mode

CameraLink

Control

Defectpixellist

Digital I/O Settings

Exposure Time

Gain Factor

Look-Up-Table

These user sets are stored within the camera and and cannot be saved outside the de-

vice.

By employing a so-called "user set default selector", one of the three possible user sets

can be selected as default, which means, the camera starts up with these adjusted pa-

rameters.

8.7.

Factory Settings

The factory settings are stored in an additional parametrization set which is used by de-

fault. This settings are not editable.

Parameter

Mirroring Control

Offset

Partial Scan

Pixelformat

Readout Mode

Testpattern

Trigger Settings