Dovpo Ember 80 Kit Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dovpo Ember 80 Kit. Dovpo Ember 80 Kit 8 pages.

5. Wattage Adjustment

When in Wattage Mode, adjust wattage by pressing "+"

or "-" button to increase or decrease wattage by 1.0

increments, hold either button to accelerate.

6. Temperature Adjustment

You can see the wire type at the bottom right corner of

the temperature value. Press "+" or "-" button to adjust

temperature in 5°C/10°F increment, when it reaches the

highest point of temperature in Celcius, press "+" button

again, it will go to the lowest point of temperature in

Fahrenheit. It works the other way around.

Temp Value

7. Replace Atomizer

When replacing an atomizer, the display will show a

New/Same interface. See following picture. Press "+"

button to confirm that is a new atomizer, press "-" button

to confirm it is the same atomizer and the resistance will

stay the same.

8. Vaping

8.1 When in Wattage Mode, it will display wattage value on

the left and output voltage on the upper right corner

and puff counter on the bottom right corner.

Wattage

80.0w

Unit

200

Wire Type

Resistance

NEW ATOMIZER?

YES+/ NO-

80.0w

0.00V

0.00Ω

Wattage

20.0w

0.00Ω

Output Voltage

4.10V

008

Puff Counter

Battery Indicator