Dovpo Ember 80 Kit Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dovpo Ember 80 Kit. Dovpo Ember 80 Kit 8 pages.

13. Lock Mode

Hold both fire button and "-" button to lock the device.

Screen displays "KEY LOCKED". "+" and "-" buttons will

be disabled in Lock Mode. When you try to adjust

wattage with "+" or "-" button, the screen will display

"HOLD FIRE AND MINUS TO UNLOCK".

Hold fire button and "-" button to unlock the device.

14. Screen Rotation

Hold fire button, "+" and "-" buttons at the same time

to rotate the screen by 180 degrees

15. Error Messages

No Atomizer: "CHECK ATOMIZER"

Short Circuit: "SHORT"

Overtime Vaping: "10S OVER"

Resistance too High: "RES TOO HIGH"

Resistance too Low: "RES TOO LOW"

Board Overheat (Over 85°C): "TOO HOT"

Input Voltage Over 4.3V: "HIGH VOLTAGE"

Output Voltage Below 2.5V: "WEAK BATTERY"

16. Charging

16.1 When charging the battery with micro USB cable, the

battery icon will indicate it's getting filled up. The

energy grid will display full after battery being fully

charged.

Charging current is 1,000mA. The screen will go dim

after the battery is fully charged.

16.2 You can vape while charging the device.