COMBAT Elite Pro Touch Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} COMBAT Elite Pro Touch. COMBAT Elite Pro Touch 12 pages.

Deleting accessories:

•

On the accessory, press and hold the reset button for 15 seconds; the red LED will

flash three times to indicate the accessory has been reset.

•

On the thermostat follow the Viewing Accessories steps

•

Press the UP/DOWN keys to view the accessory the needs to be deleted

•

Press and hold the DONE key for 10 seconds

In time clock mode, the timed output will be turned off during the holiday period and then

returned to the programmed settings once the holiday period finishes.

In thermostat mode, the holiday function reduces the set temperature to the frost mode

temperature setting configured in the setup menu.

The thermostat will maintain this temperature for the duration of the holiday and will then

automatically return to the program mode on your return.

•

Press the HOLIDAY key once

•

Enter the return time (hours) by using the UP/DOWN keys, then press NEXT to

confirm

•

Enter the return time (minutes) by using the UP/DOWN keys, then press NEXT to

confirm

•

Repeat these steps to set Day, Month and Year

•

Press DONE to confirm

The display will now show a plane symbol and indicate frost protection active. To view

or change the set frost temperature while in holiday mode, press the UP/DOWN keys

followed by DONE to confirm

Modbus interface allows the thermostat to be controlled via a building management

system (BMS).

A maximum of 32 devices can be connected to a single RS485 adapter. It is

recommended that a foil twisted pair (FTP) cable is used for the Modbus connections

All Modbus connections should be daisy-chained rather than wired in a star formation

If the thermostat is the last Modbus device on the end of the chain, move the toggle

switch on the back of the fascia to the ON position

CBT0020 Elite Pro Touch Controller User/Engineer Guide February 2024