COMBAT Elite Pro Touch 사용자 설명서 - 페이지 9
{카테고리_이름} COMBAT Elite Pro Touch에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. COMBAT Elite Pro Touch 12 페이지.
페이지 인쇄Deleting accessories:
•
On the accessory, press and hold the reset button for 15 seconds; the red LED will
flash three times to indicate the accessory has been reset.
•
On the thermostat follow the Viewing Accessories steps
•
Press the UP/DOWN keys to view the accessory the needs to be deleted
•
Press and hold the DONE key for 10 seconds
14. HOLIDAY
In time clock mode, the timed output will be turned off during the holiday period and then
returned to the programmed settings once the holiday period finishes.
In thermostat mode, the holiday function reduces the set temperature to the frost mode
temperature setting configured in the setup menu.
The thermostat will maintain this temperature for the duration of the holiday and will then
automatically return to the program mode on your return.
To set a holiday:
•
Press the HOLIDAY key once
•
Enter the return time (hours) by using the UP/DOWN keys, then press NEXT to
confirm
•
Enter the return time (minutes) by using the UP/DOWN keys, then press NEXT to
confirm
•
Repeat these steps to set Day, Month and Year
•
Press DONE to confirm
The display will now show a plane symbol and indicate frost protection active. To view
or change the set frost temperature while in holiday mode, press the UP/DOWN keys
followed by DONE to confirm
15. MODBUS
Modbus interface allows the thermostat to be controlled via a building management
system (BMS).
A maximum of 32 devices can be connected to a single RS485 adapter. It is
recommended that a foil twisted pair (FTP) cable is used for the Modbus connections
All Modbus connections should be daisy-chained rather than wired in a star formation
If the thermostat is the last Modbus device on the end of the chain, move the toggle
switch on the back of the fascia to the ON position
CBT0020 Elite Pro Touch Controller User/Engineer Guide February 2024
9