AmpleNess S52100G Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AmpleNess S52100G. AmpleNess S52100G 20 pages. Storage lithium battery

Imprimer la page

5. Installation

5.1 Installation Location

Make sure that the installation location meets the following conditions:

The building is designed to withstand earthquakes, and the floor is flat and level.



Far away from the sea to avoid salt water and humidity.



The installed location should not be access by pet and children.



No flammable or explosive materials nearby, at least 2.5m far away from combustible.



Minimal dust and dirt in the area.



No corrosive gases present, including ammonia and acid vapor.



The battery optimal operate temperature is 15°C to 30°C. Frequent exposure to severe

operating condition would exacerbate the performance and lifetime of the battery.

5.2 Installation Requirements

The installation shall be in a restricted access location/ room or in a cabinet where provides a



barriers for the battery terminal.

The maximum number of battery shall be not over 16 PCS.



5.3 Installation Materials

Following installation materials should be prepared by installers.

Power cable



Data cable



Earth cable



Ground wire



Bipolar external isolator, when two or more battery systems in parallel, each of them shall



have a bipolar isolator. Meanwhile, the isolator shall have ability to break the full load

current.

NOTICE

Make sure that the cross-sectional area of charging cables is 25 to 35 mm

NOTICE

A breaker between battery and inverter was recommended to install, and the

breaker's min. current should be over 150 A or following with local regulations.

AMPLENESS Lithium Battery S52100G User Manual