Follett EU155N Series Manuel d'installation, d'utilisation et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} Follett EU155N Series. Follett EU155N Series 20 pages. Ice and water dispensers
Également pour Follett EU155N Series : Manuel d'installation et d'entretien (20 pages), Manuel d'installation, d'utilisation et d'entretien (20 pages)

Imprimer la page

Disassembly instructions for periodic cleaning

Dispense chute cover removal

1. Remove top cover.

2. Push chute cover up vertically to slip off holding

tab.

3. After clearing tab, pull chute cover forward to

remove.

Dispense mechanism assembly removal

1. Remove top cover.

2. Remove chute cover (see above).

3. Remove auger motor assembly (see above).

4. Remove quick release pins from the ice chutes

and gates, then unplug wires from solenoids.

5. Lift dispense mechanism up and off auger tube.

Auger and auger tube removal (Fig. 3)

1. Remove auger motor and dispense mechanism

assembly (see above).

2. Pull auger upward to clear auger tube.

3. Lift auger tube upward to clear dispenser top.

4. Slide tube and bearing plate through auger tube

gasket.

Dispense wheel removal

1. Remove drain pan assembly and bin access

cover.

2. Remove center thumbnut and threaded rod on

dispense wheel assembly and lift wheel out front

access opening.

Auger motor assembly removal

1. Remove top cover.

2. Remove one thumbnut on rear of motor bracket.

3. Lift motor bracket up and unplug electric quick

disconnects.

4. Remove motor assembly.

Fig. 1

Front view

right-hand unit

drain pan

assembly

Fig. 2

Dispense assembly, top view

right-hand unit

quick

release

EU155N Ice and Water Dispensers

top cover

chute

cover

dispense

chute

solenoid

gate

ice chute