Dahua Technology DH-PFS5936-24GF8GT4XF Manuel de démarrage rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dahua Technology DH-PFS5936-24GF8GT4XF. Dahua Technology DH-PFS5936-24GF8GT4XF 16 pages. 36-port managed gigabit l3 switch

Imprimer la page
The switch can be installed on the 19-inch standard rack, and it can also be directly placed on
the working desk.
To avoid damage to the device or human, follow the attentions:
Do not place the switch near water and keep away from humid environment to avoid water
and moisture getting into the device.
Make sure the working environment of switch is clean, because the dust might cause
electrostatic adsorption, which not only affects the switch working life, but also causes
communication failure easily.
Make sure the air vent is not blocked, and do not pile up the switch.
Make sure the switch is working at the proper and stable voltage.
Make sure the grounding is normal with the grounding terminal at the rear panel of the
switch before using the switch.
Unplug the power before cleaning the switch. Do not wipe the switch with wet cloth, and do
not clean the switch with liquid.
Do not disassemble the switch enclosure when the switch is working, and do not optionally
disassemble the switch enclosure even if the switch is not powered on.
The switch is the class A product, and it might cause radio disturbance in the environment. You
could take practical measures to avoid radio disturbance.
2.1

Installing the Switch

2.1.1 Installing the Switch on the 19-inch Standard Rack

To install the switch on the 19-inch standard rack, do the following:
Step 1
Check the grounding of the rack, and make sure the rack is stable.
Step 2
Fix the rackmount hangers on both sides of the switch front panel with the screws.
Step 3
Place the switch on the carrier on the rack, and push the switch along the guide slot to
a proper position.
Step 4
Fix the rackmount hangers on the guide slot of the rack with the screws to make sure
the switch is secured.
2

Installing the Device

Figure 2-1
Tightening the rackmount hangers
Installing the Device 3