Dahua Technology DH-PFS5936-24GF8GT4XF Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dahua Technology DH-PFS5936-24GF8GT4XF. Dahua Technology DH-PFS5936-24GF8GT4XF 16 pages. 36-port managed gigabit l3 switch

Imprimer la page

1. Vlan Configuration

To connect the configuration cable, do the following:

Step 1

Connect the DB-9 plug of the configuration cable to the serial port of the PC.

Step 2

Connect the RJ-45 port of the configuration cable to the Console port of the switch.

2.2.2 Connecting the GND Cable

The GND cable is not supplied, and you need to purchase it by yourself.

Connecting the GND cable well is the important safeguard for lightning protection and

anti-electromagnetic interference.

To connect the GND cable, do the following:

Step 1

Remove the GND screw on the switch GND point with the cross screwdriver, and

thread the GND screw through the hole on the OT terminal of the GND cable. Rotate

the GND screw clockwise with the cross screwdriver, and fix the OT terminal of the

GND cable with the switch GND point.

Step 2

Wind the other side of the GND cable into the circle with the nipper pliers.

Step 3

Connect the other side of the GND cable with the grounding bar, and rotate the hex nut

clockwise with the wrench to fix the other side of the GND cable on the grounding pole.

2.2.3 Connecting the Power Cable

Make sure the switch is well grounded before you connect the power cable.

To connect the power cable, do the following:

Step 1

Insert one side of the supplied power cable into the AC power supply hub of the switch.

Step 2

Connect the other side of the power cable to the external AC power socket.

Figure 2-4

Connecting the GND cable

Figure 2-5

Connecting the power cable

Installing the Device 5