Follett VU155 Seris Manuel d'installation, d'utilisation et d'entretien - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} Follett VU155 Seris. Follett VU155 Seris 20 pages. Ice and beverage dispensers
Imprimer la page
Specifications
Electrical
Each ice machine and dispenser require a separate circuit with electrical disconnect within 10 ft (6 m). Equipment
ground required. Standard electrical – 115V, 60Hz, 1 phase. Maximum dispenser fuse – 15 amps. For ice machine
circuit requirements, refer to the ice machine specification sheet.
Model
number
VU155M series
(no integral beverage cooling)
VU155B series
(integral beverage cooling)
Plumbing
Dispenser
3/4" PVC pipe nipple for bin drain
3/4" PVC pipe nipple for drain pan drain
1" ID hose for beverage bath drain
Beverage connections
1/4" ID syrup beverage hose
3/8" ID carbonated water beverage hose
3/8" ID plain water beverage hose
Note:
Drains should be hard piped and insulated. Maintain at least 1/4" per foot (6 mm per 304 mm run)
slope on drain line run.
Water disconnect within 10 feet (3 m) of dispenser is suggested for automatic load units.
Follett recommends use of a Follett water filter system (part# 00130229) on ice machines
connected to automatic fill dispensers.
Ice machine
Refer to detailed specifications in ice machine installation manual packed with ice machine
Dispenser
amperage
2.4 amps
4.4 amps
4