Follett VU155 Seris 설치, 운영 및 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Follett VU155 Seris에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett VU155 Seris 20 페이지. Ice and beverage dispensers

Specifications

Electrical

Each ice machine and dispenser require a separate circuit with electrical disconnect within 10 ft (6 m). Equipment

ground required. Standard electrical – 115V, 60Hz, 1 phase. Maximum dispenser fuse – 15 amps. For ice machine

circuit requirements, refer to the ice machine specification sheet.

Model

number

VU155M series

(no integral beverage cooling)

VU155B series

(integral beverage cooling)

Plumbing

Dispenser

3/4" PVC pipe nipple for bin drain

3/4" PVC pipe nipple for drain pan drain

1" ID hose for beverage bath drain

Beverage connections

1/4" ID syrup beverage hose

3/8" ID carbonated water beverage hose

3/8" ID plain water beverage hose

Note:

Drains should be hard piped and insulated. Maintain at least 1/4" per foot (6 mm per 304 mm run)

slope on drain line run.

Water disconnect within 10 feet (3 m) of dispenser is suggested for automatic load units.

Follett recommends use of a Follett water filter system (part# 00130229) on ice machines

connected to automatic fill dispensers.

Ice machine

Refer to detailed specifications in ice machine installation manual packed with ice machine

Dispenser

amperage

2.4 amps

4.4 amps