Bosch Evolution 500 Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Bosch Evolution 500. Bosch Evolution 500 6 pages. Removing and replacing water valve
Également pour Bosch Evolution 500 : Manuel d'utilisation (40 pages), Bulletin de service (2 pages), Bulletin de service technique (2 pages), Bulletin de service technique (2 pages), Bulletin de service (2 pages)

Installation Option #1: Hardwire

Hardwire Electrical

supply conductors shall be

a minimum #14 AWG

copper wire

rated at 167°F or higher

The dishwasher is designed for an electrical supply of 120V, 60 Hz, AC, connected to a dishwasher-dedicated,

Home Appliances - For Internal Use Only - Do Not Distribute

Internal use only| PDC-RNA/MK | March 2013| © Robert Bosch Hausgeräte GmbH, Munich reserves all rights even in the event of industrial

property rights. We reserve all rights of disposal such as copying and passing on to third parties..

Connect wires to junction box

terminal block and securely

the terminal block screws

properly grounded electrical circuit with a fuse or breaker rated for 15 amps.

tighten

Plug the end of the power cord

into the back of the dishwasher as

shown

until it clicks