Drainvac Atomik Manuel du propriétaire - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Drainvac Atomik. Drainvac Atomik 20 pages.
Également pour Drainvac Atomik : Manuel du propriétaire (12 pages)

Imprimer la page

TROUBLE SHOOTING

PROBLEM : The unit will not start

1 - Check the circuit breaker on your electrical panel.

2 - Check the circuit breaker of the unit. ( Image C1 )

3 - Check the 24 volt circuit:

To check the 24 volt circuit, proceed as follow ;

- Establish the contact between the two ports of a wall mounted air inlet

valve with a piece of metal (ex. coin ( Image D )). If the system starts, the

suction hose is defective. See your dealer.

- If the system does not start check the 24 volt wires on the unit ( Image C2 );

Establish the contact between the two screws of the 24 volts circuit plate

using a piece of metal (ex. Screw driver ( Image E )). If the unit starts,

the 24 volt wire is either cut OR unplugged from one of the wall mounted

air inlet valves.

- If the system still do not start after steps 1, 2 and 3, the printed circuit is

defective. Call your dealer.

PROBLEM : The unit will not stop

Check the 24 volt circuit as follows ;

- Disconnect one of the two 24 volt wires on the unit ( Image C2 ). If the

unit stops, the two wires are in contact somewhere in the circuit OR

a wall mounted air inlet valve is defective.

If the unit does not stop, the printed circuit is defective. Call your dealer.

NOTE : If you notice a vibration coming from the motor, call your dealer.

Coin

IMAGE D

IMAGE C

24 volt wire

Breaker

(2)

(1)

IMAGE E