DRAKE DSE 2 PLUS Manuel d'instruction - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DRAKE DSE 2 PLUS. DRAKE DSE 2 PLUS 20 pages. Dual hd digital signage encoder
Également pour DRAKE DSE 2 PLUS : Manuel d'instruction (20 pages)
Imprimer la page
Ethernet Access (continued)
2) The following steps explain how to do this
for a computer with windows 7 operating
software:
(a) On your computer, open the "Control Panel"
(b) Click on "Network and Internet"
(c) Click on the "View network status and tasks"
(d) Click on "Change Adapter Settings" on left
hand side of the window
(e) Right-click on the "Local Area Connection",
and then click on the "properties".
(f) A dialog box entitled "Local Area Connection
Properties" will appear. In this box, double-click
on the "Internet Protocol Version 4 (TCP/IPv4)".
(g) A dialog box entitled "Internet Protocol
Version 4 (TCP/IPv4) Properties" will appear.
Select the "Use the following IP address" option
and enter the following addresses:
IP address: 172.16. .2
Subnet mask: 255.255.255.0
No need to enter a value for the Default
Gateway.
3) Open a web browser on your computer
(Internet Explorer 7 or higher is recommended)
and enter the following URL address
(http://172.16. 0.1). Once the DSE2 Plus web
server has been loaded from your browser, you
should see the login dialog (see Figure 1).
Enter the username and password and click LOG
IN. The default username is "admin" (in lower
case letters) and the default password is "pass"
(in lower case letters).
Figure 1: DSE 2 Plus Login Dialog
DSE 2 PLUS | 9
Instruction Manual