DRAKE DSE 2 PLUS 사용 설명서 - 페이지 9

{카테고리_이름} DRAKE DSE 2 PLUS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRAKE DSE 2 PLUS 20 페이지. Dual hd digital signage encoder
DRAKE DSE 2 PLUS에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄
DRAKE DSE 2 PLUS 사용 설명서
Ethernet Access (continued)
2) The following steps explain how to do this
for a computer with windows 7 operating
software:
(a) On your computer, open the "Control Panel"
(b) Click on "Network and Internet"
(c) Click on the "View network status and tasks"
(d) Click on "Change Adapter Settings" on left
hand side of the window
(e) Right-click on the "Local Area Connection",
and then click on the "properties".
(f) A dialog box entitled "Local Area Connection
Properties" will appear. In this box, double-click
on the "Internet Protocol Version 4 (TCP/IPv4)".
(g) A dialog box entitled "Internet Protocol
Version 4 (TCP/IPv4) Properties" will appear.
Select the "Use the following IP address" option
and enter the following addresses:
IP address: 172.16. .2
Subnet mask: 255.255.255.0
No need to enter a value for the Default
Gateway.
3) Open a web browser on your computer
(Internet Explorer 7 or higher is recommended)
and enter the following URL address
(http://172.16. 0.1). Once the DSE2 Plus web
server has been loaded from your browser, you
should see the login dialog (see Figure 1).
Enter the username and password and click LOG
IN. The default username is "admin" (in lower
case letters) and the default password is "pass"
(in lower case letters).
Figure 1: DSE 2 Plus Login Dialog
DSE 2 PLUS | 9
Instruction Manual