DRAKE DSE 2 PLUS 사용 설명서 - 페이지 7
{카테고리_이름} DRAKE DSE 2 PLUS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRAKE DSE 2 PLUS 20 페이지. Dual hd digital signage encoder
DRAKE DSE 2 PLUS에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)
페이지 인쇄
Rear Panel Connections
All connections are made on the rear panel.
R1
R2
R1 - RF Output – This type "F" connector is a
high level (+29.5 dBmV to +45 dBmV), agile 5 to
1002 MHz, multiplexed output from the DSE2
Plus RF output section.
R2 – DC Power Connector – This connector
provides the means for connection to the 5 VDC
output of the supplied external power supply.
R3 – Component Input 2 - These three color
coded RCA connectors, Cr (red), Cb (blue), and Y
(green), provide the means to input component
video. To input composite video, use the green
'Y' connector.
R4 – VGA Input 2 - This VGA type connector
provides the means to input VGA video from a
computer or other device with VGA output.
R5 – HDMI Input 2 - This connector provides
the means to input HDMI video (without HDCP)
with optional embedded audio.
R6 – Audio Input 2 - These two color coded RCA
vtype connectors provide baseband audio Left
(white) and Right (red) inputs to the DSE2 Plus.
R6 R7 R8
R12 R13
R4
R5
R3
R7 – Closed Caption Input 2 - This connector
provides the means to input closed captioning.
It requires analog composite video that contains
closed captioning.
R8 – VGA Loop Output 2 - This connector
provides VGA video output to a monitor or
other equipment requiring VGA input. It is only
active when VGA is input on R4.
R9 – Component Input 1 - These three color
coded RCA connectors, Cr (red), Cb (blue), and Y
(green), provide the means to input component
video. To input composite video, use the green
'Y' connector.
R10 – VGA Input 1 - This VGA type connector
provides the means to input VGA video from a
computer or other device with VGA output.
R11 – HDMI Input 1 - This connector provides
the means to input HDMI video (without HDCP)
with optional embedded audio.
DSE 2 PLUS | 7
Instruction Manual
R14
R9
R10 R11 R15 R16 R17