Draper FlexShade Instructions Installation et fonctionnement - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions Installation et fonctionnement pour {nom_de_la_catégorie} Draper FlexShade. Draper FlexShade 12 pages. Exterior clutch-operated shade
Également pour Draper FlexShade : Manuel d'installation et d'utilisation (8 pages), Instructions d'installation (2 pages), Manuel d'instructions (12 pages), Instructions d'installation et d'utilisation (11 pages), Instructions Installation et fonctionnement (16 pages), Instructions Installation et fonctionnement (4 pages), Manuel d'instructions (7 pages), Instructions Installation et fonctionnement (12 pages), Instructions Installation et fonctionnement (16 pages)

Imprimer la page
Draper FlexShade Instructions Installation et fonctionnement
Dual Roller Coupled Motorized FlexShade

Section 3 - Pocket Headbox Installation

Please Note: Installer must provide adequate clearance for removal of
Roller Assembly during installation and maintenance.
Please Note: Headbox must be mounted directly to ceiling, or to a
continuous blocking that is secured to building structure.
Figure 3-B
1.
2.
Mark location of optional
pre-drilled pocket
mounting holes and
endcap mounting holes
on top side of headbox
on mounting surface.
Figure 3-D
Brackets mounted
to continuous
blocking (by others)
secured to
building
structure.
Lift headbox into
mounting position.
A.
®
(Extra Large Hardware)
Figure 3-A
Figure 3-C
3.
Drill small
starter hole
(if necessary)
in mounting
surface.
5.
Mount endcaps using appropriate
fasteners for surface
6.
Mount pocket closure.
.
(Fig. 3-D)
3"
Headbox
(76mm)
Closure
Clip
Panel
(With
optional
tile support)
B.
Ceiling
(by others)
page 4 of 12
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
.
(Section 1)
OR
3"
Headbox
(76mm)
Closure
Clip
Panel
(Without
optional
tile support)
OR