Draper FlexShade Installatie- en bedieningsinstructies - Pagina 4

Blader online of download pdf Installatie- en bedieningsinstructies voor {categorie_naam} Draper FlexShade. Draper FlexShade 12 pagina's. Exterior clutch-operated shade
Ook voor Draper FlexShade: Installatie- en bedieningshandleiding (8 pagina's), Installatie-instructies (2 pagina's), Gebruiksaanwijzing (12 pagina's), Installatie- en bedieningsinstructies (11 pagina's), Installatie- en bedieningsinstructies (16 pagina's), Installatie- en bedieningsinstructies (4 pagina's), Gebruiksaanwijzing (7 pagina's), Installatie- en bedieningsinstructies (12 pagina's), Installatie- en bedieningsinstructies (16 pagina's)

Pagina afdrukken
Draper FlexShade Installatie- en bedieningsinstructies
Dual Roller Coupled Motorized FlexShade

Section 3 - Pocket Headbox Installation

Please Note: Installer must provide adequate clearance for removal of
Roller Assembly during installation and maintenance.
Please Note: Headbox must be mounted directly to ceiling, or to a
continuous blocking that is secured to building structure.
Figure 3-B
1.
2.
Mark location of optional
pre-drilled pocket
mounting holes and
endcap mounting holes
on top side of headbox
on mounting surface.
Figure 3-D
Brackets mounted
to continuous
blocking (by others)
secured to
building
structure.
Lift headbox into
mounting position.
A.
®
(Extra Large Hardware)
Figure 3-A
Figure 3-C
3.
Drill small
starter hole
(if necessary)
in mounting
surface.
5.
Mount endcaps using appropriate
fasteners for surface
6.
Mount pocket closure.
.
(Fig. 3-D)
3"
Headbox
(76mm)
Closure
Clip
Panel
(With
optional
tile support)
B.
Ceiling
(by others)
page 4 of 12
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
.
(Section 1)
OR
3"
Headbox
(76mm)
Closure
Clip
Panel
(Without
optional
tile support)
OR