Alemlube 600AS Manuel du propriétaire

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Alemlube 600AS. Alemlube 600AS 2 pages. Underground coal mine lever action grease gun

Imprimer la page

Underground Coal Mine Lever Action Grease Gun

Description

The 600AS, manufactured in Germany, is a heavy duty lever action 450g grease gun designed for use

in the Australian Underground Coal market as the grease gun is 100% aluminium free.

Capable of delivering up to 1.6cc of grease per stroke at a maximum operating pressure of up to 12,000psi.

Supplied standard with a 16.5cm rigid extension & a 4 jaw coupler for lubricating points quickly & effortlessly.

The 600AS has a 600g capacity when using bulk grease. 4 year warranty as standard. Furthermore, the patented

Ever-Flow System enables the gun to be used even with most thick, tacky greases up to NLGI3.

Specifications

Uses

Pressure Capabilities

Delivery

Operating Instructions

There are two ways to fill the gun with grease:

A: 450g Grease Cartridge:

Unscrew the grease barrel from the gun and insert the 450g grease

cartridge by holding the barrel assembly and pulling the rod back.

Remove cap from the grease cartridge, insert the cartridge into the

barrel and then rescrew the barrel assembly back onto the gun so that

the cartridge sits well against the follower cup. Once in position, press

the clamp down & push the rod firmly back into the barrel.

Important To Note:

When using the gun with a cartridge, the follower cup must be folded back.

The gun is supplied standard with the follower cup in this position.

B: Bulk Grease Loading:

Unscrew the grease barrel from the gun head & insert the barrel into the bulk

grease. Suck the grease up into the barrel by pulling the rod all the way back.

When barrel is full with grease, rescrew the barrel assembly back onto the

gun head so that the follower sits well against the grease. Press the clamp

down & push the rod firmly back into the barrel.

Important To Note:

When using the gun with bulk grease, the follower cup must be folded

forward. To do this, take the follower cup and rod assembly out of the barrel,

fold the follower cup forward and reassemble the barrel assembly.

Maintenance

Cleaning: always keep the follower cup free of impurities. Your grease should

be clear of any foreign particles, dirt etc and the gun should be checked

and cleaned regularly.

Trouble Shooting

Air Pocked In Grease: If the gun is pumped but no grease appears from the coupler:

Depress the air bleeder valve on the head and pump a few strokes.

Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger rod.

With the follower cup engaged the follower cup will move further down into the barrel venting any trapped air out

through the thread connections between the barrel and head. Unscrew the rigid extension as well.

NSW/ACT

QLD/PNG

TEL: (02) 9677 1555

TEL: (07) 3204 9166

FAX: (02) 9675 1155

FAX: (07) 3204 1224

OWNER'S MANUAL

450g Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum.

Up to 12,000psi grease pressure

1.6cc per stroke

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

SA/NT

TEL: (08) 9302 4199

TEL: (08) 8241 7111

FAX: (08) 9303 2095

FAX: (08) 8241 7011

www.alemlube.co.nz

600AS

June 2022

TEL: (09) 447 1007

FAX: (09) 447 1008