Alemlube 600AS Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Інструменти Alemlube 600AS. Alemlube 600AS 2 сторінки. Underground coal mine lever action grease gun
Друкувати сторінкуUnderground Coal Mine Lever Action Grease Gun
Description
The 600AS, manufactured in Germany, is a heavy duty lever action 450g grease gun designed for use
in the Australian Underground Coal market as the grease gun is 100% aluminium free.
Capable of delivering up to 1.6cc of grease per stroke at a maximum operating pressure of up to 12,000psi.
Supplied standard with a 16.5cm rigid extension & a 4 jaw coupler for lubricating points quickly & effortlessly.
The 600AS has a 600g capacity when using bulk grease. 4 year warranty as standard. Furthermore, the patented
Ever-Flow System enables the gun to be used even with most thick, tacky greases up to NLGI3.
Specifications
Uses
Pressure Capabilities
Delivery
Operating Instructions
There are two ways to fill the gun with grease:
A: 450g Grease Cartridge:
Unscrew the grease barrel from the gun and insert the 450g grease
cartridge by holding the barrel assembly and pulling the rod back.
Remove cap from the grease cartridge, insert the cartridge into the
barrel and then rescrew the barrel assembly back onto the gun so that
the cartridge sits well against the follower cup. Once in position, press
the clamp down & push the rod firmly back into the barrel.
Important To Note:
When using the gun with a cartridge, the follower cup must be folded back.
The gun is supplied standard with the follower cup in this position.
B: Bulk Grease Loading:
Unscrew the grease barrel from the gun head & insert the barrel into the bulk
grease. Suck the grease up into the barrel by pulling the rod all the way back.
When barrel is full with grease, rescrew the barrel assembly back onto the
gun head so that the follower sits well against the grease. Press the clamp
down & push the rod firmly back into the barrel.
Important To Note:
When using the gun with bulk grease, the follower cup must be folded
forward. To do this, take the follower cup and rod assembly out of the barrel,
fold the follower cup forward and reassemble the barrel assembly.
Maintenance
Cleaning: always keep the follower cup free of impurities. Your grease should
be clear of any foreign particles, dirt etc and the gun should be checked
and cleaned regularly.
Trouble Shooting
Air Pocked In Grease: If the gun is pumped but no grease appears from the coupler:
Depress the air bleeder valve on the head and pump a few strokes.
Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger rod.
With the follower cup engaged the follower cup will move further down into the barrel venting any trapped air out
through the thread connections between the barrel and head. Unscrew the rigid extension as well.
NSW/ACT
QLD/PNG
TEL: (02) 9677 1555
TEL: (07) 3204 9166
FAX: (02) 9675 1155
FAX: (07) 3204 1224
OWNER'S MANUAL
450g Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum.
Up to 12,000psi grease pressure
1.6cc per stroke
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9302 4199
TEL: (08) 8241 7111
FAX: (08) 9303 2095
FAX: (08) 8241 7011
or
www.alemlube.co.nz
600AS
June 2022
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
1