Bosch Divar 700 Series Information - Page 6

Parcourez en ligne ou téléchargez le pdf Information pour {nom_de_la_catégorie} Bosch Divar 700 Series. Bosch Divar 700 Series 11 pages. Digital hybrid recorder digital network recorder
Également pour Bosch Divar 700 Series : Spécifications (8 pages), Installation rapide (4 pages), Manuel d'utilisation (22 pages), Installation rapide (4 pages), Instructions de base (14 pages)

Bosch Divar 700 Series Information
6 | AUTODOME 700 Series IP PTZ Camera
Protection on Power
Peak current 21.4 A, peak power 1500 W
Output (Arm Power
(10/1000 μs)
Supply)
10/100 Ethernet
Peak current 14 A, peak power 200 W
Data Lines
(8/20 μs)

Software Control

Camera Setup/Control
Via Internet Explorer Web browser version
7.0 or later, Bosch Configuration Manager
or BVMS
Software Update
Firmware upload
Network
Standards
H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming
A total of four (4) independent streams:
• Two (2) individually configurable H.
• One (1) H.264, I-frame only stream
• One (1) M‑JPEG stream at 4CIF/D1
GOP Structure
IP, IBP, IBBP
Data Rate
9.6 kbps to 6 Mbps
Overall IP Delay
240 ms
Resolution (Horizontal x Vertical, PAL/NTSC)
• 4CIF/D1
704 x 576/480 (50/60 ips
• CIF
352 x 288/240 (50/60 ips
4. Depending on picture content and movement
Ethernet
10-Base T/100 Base-TX, auto-sensing, half/
full duplex, RJ45
Protocols
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP v3, RTSP, 802.1x, iSCSI,
DynDNS, UPnP, IP v4/6, QoS, SSH, SSL
Audio
• Standard
G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
• Signal-to-
>50 dB
Noise Ratio
• Audio
Full Duplex / Half Duplex
Streaming
Fiber Optic Kit
VG4-SFPSCKT
Description
Fiber Optic Ethernet Media Converter kit
Requires a small form-factor pluggable (SFP)
module (sold separately).
Data Interface
Ethernet
Data Rate
10/100 Mbps
IEEE 802.3 Compliant
264 streams at 4CIF/D1 resolution,
(suitable for recording)
resolution
)
4
)
4
5
Compatible Receiver
Installation
5. Kit available separately and must be installed inside the AutoDome power supply box.
SFP Modules
Description
Data Interface
Data Rate
Mechanical
Dimensions (LxWxH)
• SFP-2 and SFP-3
• SFP-25, SFP-26
Weight (all SFP modules)
Type
SFP-2
MMF
SFP-3
SMF
SFP-25
MMF
SFP-26
MMF
Fiber Compatibility
Optical Fiber Compatibility,
MMF
Optical Fiber Compatibility,
SMF
Optical Distance
Specifications
.
Miscellaneous
Sectors/Titling
Masking
Full Duplex or Half Duplex Electrical Port
Full Duplex Optical Port
CNFE2MC
Installed inside a VG4-A-PA0, VG4-A-PA1,
VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2
power supply box with supplied mounting
hardware
Interchangeable modules available for use
with MMF or SMF optical fiber.
Ethernet
10/100 Mbps
IEEE 802.3 Compliant
55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
0.23 kg (.05 lb)
Connec
Wavelength
tor
(transmit/receive)
Duplex
1310 nm /
LC
1310 nm
Duplex
1310 nm /
LC
1310 nm
Single
1310 nm /
SC
1550 nm
Single
1550 nm /
SC
1310 nm
50/125 µm MMF. For 50/125 µm
fiber, subtract 4 dB from the specified
optical budget value. Must meet or
exceed fiber standard ITU-T G.651.
8–10/125 µm SMF. Must meet or
exceed fiber standard ITU-T G.652.
Specified transmission distances are
limited to the optical loss of the fiber
and any additional loss introduced by
connectors, splices, and patch panels.
The modules are designed to operate
over the entire optical loss budget
range, so they do not require a
minimum loss in order to operate.
16 independent sectors with a 20-character
title/sector
24 individually configurable privacy masks
Max.
Distance
2 km
(1.2 miles)
20 km
(12.4 miles)
2 km
(1.2 miles)
2 km
(1.2 miles)