Bosch Divar 700 Series Information - Page 6

Browse online or download pdf Information for Oven Bosch Divar 700 Series. Bosch Divar 700 Series 11 pages. Digital hybrid recorder digital network recorder
Also for Bosch Divar 700 Series: Specifications (8 pages), Quick Install (4 pages), Operation Manual (22 pages), Quick Install (4 pages), Basic Instructions (14 pages)

Print Page

1. Software Control

6 | AUTODOME 700 Series IP PTZ Camera

Protection on Power

Peak current 21.4 A, peak power 1500 W

Output (Arm Power

(10/1000 μs)

Supply)

10/100 Ethernet

Peak current 14 A, peak power 200 W

Data Lines

(8/20 μs)

Software Control

Camera Setup/Control

Via Internet Explorer Web browser version

7.0 or later, Bosch Configuration Manager

or BVMS

Software Update

Firmware upload

Network

Standards

H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG

Streaming

A total of four (4) independent streams:

• Two (2) individually configurable H.

• One (1) H.264, I-frame only stream

• One (1) M‑JPEG stream at 4CIF/D1

GOP Structure

IP, IBP, IBBP

Data Rate

9.6 kbps to 6 Mbps

Overall IP Delay

240 ms

Resolution (Horizontal x Vertical, PAL/NTSC)

• 4CIF/D1

704 x 576/480 (50/60 ips

• CIF

352 x 288/240 (50/60 ips

4. Depending on picture content and movement

Ethernet

10-Base T/100 Base-TX, auto-sensing, half/

full duplex, RJ45

Protocols

RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,

FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,

SNTP, SNMP v3, RTSP, 802.1x, iSCSI,

DynDNS, UPnP, IP v4/6, QoS, SSH, SSL

Audio

• Standard

G.711, 8 kHz sampling rate

L16, 16 kHz sampling rate

• Signal-to-

>50 dB

Noise Ratio

• Audio

Full Duplex / Half Duplex

Streaming

Fiber Optic Kit

VG4-SFPSCKT

Description

Fiber Optic Ethernet Media Converter kit

Requires a small form-factor pluggable (SFP)

module (sold separately).

Data Interface

Ethernet

Data Rate

10/100 Mbps

IEEE 802.3 Compliant

264 streams at 4CIF/D1 resolution,

(suitable for recording)

resolution

)

Compatible Receiver

Installation

5. Kit available separately and must be installed inside the AutoDome power supply box.

SFP Modules

Description

Data Interface

Data Rate

Mechanical

Dimensions (LxWxH)

• SFP-2 and SFP-3

• SFP-25, SFP-26

Weight (all SFP modules)

Type

SFP-2

MMF

SFP-3

SMF

SFP-25

MMF

SFP-26

MMF

Fiber Compatibility

Optical Fiber Compatibility,

MMF

Optical Fiber Compatibility,

SMF

Optical Distance

Specifications

Miscellaneous

Sectors/Titling

Masking

Full Duplex or Half Duplex Electrical Port

Full Duplex Optical Port

CNFE2MC

Installed inside a VG4-A-PA0, VG4-A-PA1,

VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2

power supply box with supplied mounting

hardware

Interchangeable modules available for use

with MMF or SMF optical fiber.

Ethernet

10/100 Mbps

IEEE 802.3 Compliant

55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)

63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)

0.23 kg (.05 lb)

Connec

Wavelength

tor

(transmit/receive)

Duplex

1310 nm /

1310 nm

Duplex

1310 nm /

1310 nm

Single

1310 nm /

1550 nm

Single

1550 nm /

1310 nm

50/125 µm MMF. For 50/125 µm

fiber, subtract 4 dB from the specified

optical budget value. Must meet or

exceed fiber standard ITU-T G.651.

8–10/125 µm SMF. Must meet or

exceed fiber standard ITU-T G.652.

Specified transmission distances are

limited to the optical loss of the fiber

and any additional loss introduced by

connectors, splices, and patch panels.

The modules are designed to operate

over the entire optical loss budget

range, so they do not require a

minimum loss in order to operate.

16 independent sectors with a 20-character

title/sector

24 individually configurable privacy masks

Max.

Distance

2 km

(1.2 miles)

20 km

(12.4 miles)

2 km

(1.2 miles)

2 km

(1.2 miles)