Electrolux 400 SERIES Manuel d'utilisation et d'entretien - Page 31
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux 400 SERIES. Electrolux 400 SERIES 39 pages. Front load dryer
Également pour Electrolux 400 SERIES : Manuel d'utilisation et d'entretien (16 pages), Manuel d'instructions d'installation (50 pages), Manuel d'utilisation et d'entretien (28 pages), Manuel d'utilisation et d'entretien (46 pages)
Imprimer la page
Solutions to Common Inquiries
PROBLEM POSSIBLE CAUSES
Pilling
• Pilling is normal with
synthetic and perma-
(Fibers
nent press fabrics. This
ball up
is due to abrasion from
and cling
normal wear.
to fabric.)
Residue
• Undissolved detergent.
or powder
• Some granular deter-
on dark
gents can combine with
items;
hard water minerals to
Stiff, harsh
form a residue.
fabrics.
• Overloading washer.
Wrinkling
• Overloading washer.
• Incorrect wash cycle for
wash load.
Yellow
• Agitation time too short.
buildup
• Wash water temperature
of body
too low.
soil on
• Not enough detergent.
synthetic
fabrics
Yellow or
• Iron or manganese in
brown rust
water supply, water
stains
pipes, or water heater.
SOLUTIONS
• Use a lint brush or
shaver to remove pills.
• Rewash load.
• Reduce load size.
• Rinse in cold water
with liquid fabric soft-
ener using the casual
or delicate cycle.
• Soak in detergent
booster or product
containing enzymes.
• Wash in hottest water
safe for fabric using
casual cycle.
• Increase detergent.
• Add bleach safe for
fabric or treat with
color remover.
• To restore discolored
load of whites, use
rust remover safe for
fabric.
• DO NOT use chlorine
bleach to remove rust
stains. It may intensify
discoloration.
PREVENTIVE
MEASURES
• Use fabric softener
in washer to lubri-
cate fibers.
• When ironing, use
spray starch or fab-
ric finish on collars
and cuffs.
• Turn items inside
out to reduce abra-
sion.
• Increase water tem-
perature using hot-
test water safe for
fabric.
• DO NOT overload
washer.
• Use liquid detergent
or nonprecipitat-
ing water condition-
er with powder de-
tergent.
• DO NOT overload
washer.
• Remove items from
washer as soon as
cycle is completed.
• Use liquid fabric
softener.
• Select correct cycle.
• Use correct amount
of detergent.
• Wash synthetics
frequently using hot
or warm water.
• Use nonprecipitat-
ing water softener.
• Before washing,
run hot water for a
few minutes to clear
lines.
• Drain water heater
occasionally.
• For an ongoing
problem, install an
iron filter in your wa-
ter supply system.
31