Electrolux 400 SERIES Instrukcja obsługi i konserwacji - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Spryskiwacz Electrolux 400 SERIES. Electrolux 400 SERIES 39 stron. Front load dryer
Również dla Electrolux 400 SERIES: Instrukcja obsługi i konserwacji (16 strony), Instrukcja instalacji (50 strony), Instrukcja obsługi i konserwacji (28 strony), Instrukcja obsługi i konserwacji (46 strony)

Electrolux 400 SERIES Instrukcja obsługi i konserwacji
Solutions to Common Inquiries
PROBLEM POSSIBLE CAUSES
Pilling
• Pilling is normal with
synthetic and perma-
(Fibers
nent press fabrics. This
ball up
is due to abrasion from
and cling
normal wear.
to fabric.)
Residue
• Undissolved detergent.
or powder
• Some granular deter-
on dark
gents can combine with
items;
hard water minerals to
Stiff, harsh
form a residue.
fabrics.
• Overloading washer.
Wrinkling
• Overloading washer.
• Incorrect wash cycle for
wash load.
Yellow
• Agitation time too short.
buildup
• Wash water temperature
of body
too low.
soil on
• Not enough detergent.
synthetic
fabrics
Yellow or
• Iron or manganese in
brown rust
water supply, water
stains
pipes, or water heater.
SOLUTIONS
• Use a lint brush or
shaver to remove pills.
• Rewash load.
• Reduce load size.
• Rinse in cold water
with liquid fabric soft-
ener using the casual
or delicate cycle.
• Soak in detergent
booster or product
containing enzymes.
• Wash in hottest water
safe for fabric using
casual cycle.
• Increase detergent.
• Add bleach safe for
fabric or treat with
color remover.
• To restore discolored
load of whites, use
rust remover safe for
fabric.
• DO NOT use chlorine
bleach to remove rust
stains. It may intensify
discoloration.
PREVENTIVE
MEASURES
• Use fabric softener
in washer to lubri-
cate fibers.
• When ironing, use
spray starch or fab-
ric finish on collars
and cuffs.
• Turn items inside
out to reduce abra-
sion.
• Increase water tem-
perature using hot-
test water safe for
fabric.
• DO NOT overload
washer.
• Use liquid detergent
or nonprecipitat-
ing water condition-
er with powder de-
tergent.
• DO NOT overload
washer.
• Remove items from
washer as soon as
cycle is completed.
• Use liquid fabric
softener.
• Select correct cycle.
• Use correct amount
of detergent.
• Wash synthetics
frequently using hot
or warm water.
• Use nonprecipitat-
ing water softener.
• Before washing,
run hot water for a
few minutes to clear
lines.
• Drain water heater
occasionally.
• For an ongoing
problem, install an
iron filter in your wa-
ter supply system.
31