Bdcom S1526-24P-400 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Bdcom S1526-24P-400. Bdcom S1526-24P-400 14 pages. Gigabit uplink poe switch
Imprimer la page
Power socket
Connect the female connector of the power cord here, and the male connector to the AC
(Alternating Current) power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage
Grounding
The switch already comes with lightning protection mechanism. You can also ground the switch
through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
Caution： Please use the provided power cord.
Installation
Package Contents
▄
PoE Switch. ......................................................................... 1
▄
AC Power Cord. .......................................................... 1
▄
User Guide. .................................................................. 1
▄
Accessories(Rack angle iron*2, Rack installation bolt*8, plastic cushion*4)
Caution： If any part is lost and damaged, please contact your local agent immediately.
Safety Precautions
To avoid any device damage and bodily injury caused by improper use, please observe the following rules.
▄
Keep the power off during the installation.
▄
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is well grounded.
▄
Use only the power cord provided with the switch.
▄
Make sure that the supply voltage matches the specifications indicated on the rear panel of the switch.
▄
Ensure the vent hole is well ventilated and unblocked.
▄
Do not open or remove the cover of the switch.
▄
Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never use any other liquid
cleaning method.
Desktop Installation
Install the Switch on a desktop, please attach these cushioning rubber feet provided on the bottom at each corner of the
Switch in case of the external vibration. Allow adequate space for ventilation between the device and the objects around it.
Make sure the power socket has a good contact with the ground.