Bdcom S1526-24P-400 사용자 설명서 - 페이지 4

{카테고리_이름} Bdcom S1526-24P-400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bdcom S1526-24P-400 14 페이지. Gigabit uplink poe switch

Power socket

Connect the female connector of the power cord here, and the male connector to the AC

(Alternating Current) power outlet. Please make sure the voltage of the power supply meets the

requirement of the input voltage

Grounding

The switch already comes with lightning protection mechanism. You can also ground the switch

through the PE (Protecting Earth) cable of AC cord or with Ground Cable.

Caution： Please use the provided power cord.

Installation

Package Contents

▄

PoE Switch. ......................................................................... 1

▄

AC Power Cord. .......................................................... 1

▄

User Guide. .................................................................. 1

▄

Accessories(Rack angle iron*2, Rack installation bolt*8, plastic cushion*4)

Caution： If any part is lost and damaged, please contact your local agent immediately.

Safety Precautions

To avoid any device damage and bodily injury caused by improper use, please observe the following rules.

▄

Keep the power off during the installation.

▄

Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is well grounded.

▄

Use only the power cord provided with the switch.

▄

Make sure that the supply voltage matches the specifications indicated on the rear panel of the switch.

▄

Ensure the vent hole is well ventilated and unblocked.

▄

Do not open or remove the cover of the switch.

▄

Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never use any other liquid

cleaning method.

Desktop Installation

Install the Switch on a desktop, please attach these cushioning rubber feet provided on the bottom at each corner of the

Switch in case of the external vibration. Allow adequate space for ventilation between the device and the objects around it.

Make sure the power socket has a good contact with the ground.