Alemlube EL SERIES Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Alemlube EL SERIES. Alemlube EL SERIES 17 pages. Oil pump
Également pour Alemlube EL SERIES : Instructions de service (3 pages), Manuel technique du propriétaire (4 pages), Manuel technique du propriétaire (6 pages), Manuel technique du propriétaire (11 pages), Instructions de service (2 pages), Instructions de service (2 pages), Manuel technique du propriétaire (4 pages), Manuel technique du propriétaire (2 pages), Manuel technique du propriétaire (4 pages), Manuel technique du propriétaire (5 pages), Manuel du propriétaire (4 pages)

Imprimer la page
Alemlube EL SERIES Manuel d'instruction
Procedure for entering the correction factor directly
Carefully follow the procedure indicated below.
Formula: Proper correction factor = current correction factor × (actual value / display value)
Example: Actual value
Display value
Current correction factor
Proper correction factor
1
Wait for the meter to go standby.
2
Reset the resettable total.
3
Press the MOVE key. Keep it pressed until it shows similar
to the right image (the digit flash in
the meter is under the calibration mode.
4
Press the RESET key to choose the right digit from 0 to 9.
Press the MOVE key to start the next digit. So the digit of
correction factor can be changed one by one.
5
Make sure the correction factor is right, press the MOVE key.
Keep it pressed until the indication of calibration mode quits
and the factor is saved.
NSW/ACT
QLD/PNG
TEL: (02) 9939 0711
TEL: (07) 3889 8480
FAX: (02) 9939 0411
FAX: (07) 3889 8490
OWNER'S TECHNICAL MANUAL
Oil Transfer Kit with Meter & Trolley
20.75
18.96
1.000
1.000 × (20.75 / 18.96) = 1.000 × 1.094 = 1.094
zone), which means
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9209 3066
TEL: (08) 8241 7111
FAX: (08) 9209 3933
FAX: (08) 8241 7011
or
www.alemlube.co.nz
O30060
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
10