Alemlube EL SERIES Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sistem pelumasan Alemlube EL SERIES. Alemlube EL SERIES 17 halaman. Oil pump
Juga untuk Alemlube EL SERIES: Petunjuk Servis (3 halaman), Panduan Teknis Pemilik (4 halaman), Panduan Teknis Pemilik (6 halaman), Panduan Teknis Pemilik (11 halaman), Petunjuk Servis (2 halaman), Petunjuk Servis (2 halaman), Panduan Teknis Pemilik (4 halaman), Panduan Teknis Pemilik (2 halaman), Panduan Teknis Pemilik (4 halaman), Panduan Teknis Pemilik (5 halaman), Panduan Pemilik (4 halaman)

Procedure for entering the correction factor directly

Carefully follow the procedure indicated below.

Formula: Proper correction factor = current correction factor × (actual value / display value)

Example: Actual value

Display value

Current correction factor

Proper correction factor

Wait for the meter to go standby.

Reset the resettable total.

Press the MOVE key. Keep it pressed until it shows similar

to the right image (the digit flash in

the meter is under the calibration mode.

Press the RESET key to choose the right digit from 0 to 9.

Press the MOVE key to start the next digit. So the digit of

correction factor can be changed one by one.

Make sure the correction factor is right, press the MOVE key.

Keep it pressed until the indication of calibration mode quits

and the factor is saved.

NSW/ACT

QLD/PNG

TEL: (02) 9939 0711

TEL: (07) 3889 8480

FAX: (02) 9939 0411

FAX: (07) 3889 8490

OWNER'S TECHNICAL MANUAL

Oil Transfer Kit with Meter & Trolley

20.75

18.96

1.000

1.000 × (20.75 / 18.96) = 1.000 × 1.094 = 1.094



zone), which means

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

SA/NT

TEL: (08) 9209 3066

TEL: (08) 8241 7111

FAX: (08) 9209 3933

FAX: (08) 8241 7011

www.alemlube.co.nz

O30060

TEL: (09) 447 1007

FAX: (09) 447 1008