Drazice OKC 160 NTR / BP Manuel d'utilisation et d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Drazice OKC 160 NTR / BP. Drazice OKC 160 NTR / BP 17 pages. Stationary water heaters
Également pour Drazice OKC 160 NTR / BP : Manuel d'utilisation et d'installation (12 pages), Manuel d'utilisation et d'installation (20 pages), Manuel d'utilisation et d'installation (20 pages), Manuel d'utilisation et d'installation (18 pages), Manuel d'utilisation et d'installation (20 pages), Manuel d'utilisation et d'installation (18 pages), Manuel d'utilisation et d'installation (13 pages)

CONNECTION OF INDIRECT HEATER TO HOT WATER HEATING SYSTEM

(Fig. Examples of connection... and Fig. 1)

It is recommended to install stop valves on the heating water inlet and outlet (for possible dismantling of the heater). The

valves have to be as close to the heater as possible to avoid higher thermal losses.

The heating circuit is connected to marked inputs and outputs of the heater exchanger; the deaerating valve is mounted in

the highest place. It is necessary to install a filter into the circuit in order to protect the pumps, the three-way valve, and

backflow flaps, and the exchanger from sedimentation. It is recommended to flush the heating circuit before the assembly.

All wiring connections must be properly insulated from heat.

If the system works with priority heating of HSW using a three-way valve, always follow the installation instructions of

the three-way valve's manufacturer.