- ページ 7

ボイラー Drazice OKC 160 NTR / BPのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Drazice OKC 160 NTR / BP 17 ページ。 Stationary water heaters
Drazice OKC 160 NTR / BP にも：操作および設置マニュアル (12 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (18 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (18 ページ), 操作および設置マニュアル (13 ページ)

CONNECTION OF INDIRECT HEATER TO HOT WATER HEATING SYSTEM

(Fig. Examples of connection... and Fig. 1)

It is recommended to install stop valves on the heating water inlet and outlet (for possible dismantling of the heater). The

valves have to be as close to the heater as possible to avoid higher thermal losses.

The heating circuit is connected to marked inputs and outputs of the heater exchanger; the deaerating valve is mounted in

the highest place. It is necessary to install a filter into the circuit in order to protect the pumps, the three-way valve, and

backflow flaps, and the exchanger from sedimentation. It is recommended to flush the heating circuit before the assembly.

All wiring connections must be properly insulated from heat.

If the system works with priority heating of HSW using a three-way valve, always follow the installation instructions of

the three-way valve's manufacturer.