Bosch 1500C Manuel d'utilisation et de sécurité - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et de sécurité pour {nom_de_la_catégorie} Bosch 1500C. Bosch 1500C 33 pages. Gauge shear
Également pour Bosch 1500C : Manuel d'utilisation et de sécurité (29 pages)
Imprimer la page
BM 3609929809 01-11:BM 3609929809 01-11 1/18/12 12:28 PM Page 9
Start the tool before applying to work and let
the tool come to full speed before contacting
the workpiece. Lift the tool from the work
before releasing the switch. DO NOT turn the
switch "ON" and "OFF" while the tool is
under load; this will greatly decrease the
switch life.
Before cutting, lightly oil the cutting line.
Hold the tool at a angle 80° to 90° to the metal
surface (Fig. 2).
FIG. 2
The hand guard protects the hands while
cutting, and deflects material downwards and
away from the operator. The hand guard
must be used at all times while using this
shear.
Tool Tips
Excessive feed rates reduce the performance
considerably and shorten the life of the cutters.
Sharp cutters produce good cutting results and
protects the tool.
Do not load the tool so heavily that it stalls.
Cutting curved lines: Do not tilt the tool and
work with low feed rate.
-9-
HAND GUARD