- ページ 9

電動工具 Bosch 1500CのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch 1500C 33 ページ。 Gauge shear
Bosch 1500C にも：取扱説明書 (29 ページ)

BM 3609929809 01-11:BM 3609929809 01-11 1/18/12 12:28 PM Page 9

Start the tool before applying to work and let

the tool come to full speed before contacting

the workpiece. Lift the tool from the work

before releasing the switch. DO NOT turn the

switch "ON" and "OFF" while the tool is

under load; this will greatly decrease the

switch life.

Before cutting, lightly oil the cutting line.

Hold the tool at a angle 80° to 90° to the metal

surface (Fig. 2).

FIG. 2

The hand guard protects the hands while

cutting, and deflects material downwards and

away from the operator. The hand guard

must be used at all times while using this

shear.

Tool Tips

Excessive feed rates reduce the performance

considerably and shorten the life of the cutters.

Sharp cutters produce good cutting results and

protects the tool.

Do not load the tool so heavily that it stalls.

Cutting curved lines: Do not tilt the tool and

work with low feed rate.

-9-

HAND GUARD