Athletica Sport Systems FM-45G Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Athletica Sport Systems FM-45G. Athletica Sport Systems FM-45G 8 pages. Ice puck freezer

Imprimer la page

Ice Puck Freezer

Product User Manual

PARTS & FEATURES

Your portable freezer is supplied with all the

accessories you need to enjoy refrigeration almost

anywhere. Below is an image of the freezer features

and standard accessories.

Side

Handle

AC Power Cord

Insulated Lid

Latch

Wire Baskets

DC Power Cord

554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL 519-747-1856

720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL 763-249-7465

Proper Location

Because this unit is compressor based appliance,

ample space is required around the unit to allow it to

exhaust

Position your portable freezer in a location where

there is proper air circulation and electrical

connections.

Keep the portable freezer away from heat and direct

sunlight if possible.

This portable freezer is suitable for vehicle use and

camping, however, the appliance should never be

exposed to rain.

This portable freezer should not be placed in a built-

in or recessed area. It is designed to be freestanding.

The normal operation of the freezer depends on

heat radiation from the condenser. For the initial

use, remove all packaging and allow at least 6" of

clearance around the perimeter of the freezer.

Movement & Installation

1. Remove all interior and exterior packaging.

2. Position the freezer in a dry and well-ventilated

place. Keep the freezer away from direct sunlight,

heaters and corrosive gases/chemicals.

3. Clean the interior surface with lukewarm water

and a soft cloth.

4. When inserting the AC power cord into the

power socket, make sure the power socket is

a grounded 115V~AC / 60Hz socket. Also, make

sure that the unit's grounding prong has not

being tampered with.

Note: When inserting the DC power-cord,

make sure the input is a 12V~DC / 24V power

source.

5. When moving the freezer, always use both

handles to the carry the unit as level as possible.

This is in order to protect the compressor and the

sealed system.