Carmanah R829-E Manuel d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Carmanah R829-E. Carmanah R829-E 20 pages. Traffic beacon
Également pour Carmanah R829-E : Manuel de démarrage rapide (20 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages)
Imprimer la page
• Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".
• Insert one end of 3" red wire into PBS+ terminal.
• Route modified AI harness wires (from Steps 2 – 5, violet, blue, black, red and yellow)
into the hole shown.
• Install the wires into the terminals as follows:
9
Violet →
3-position splice terminal with red wire going to PBS+
→
Blue
EXT1
→
Red
Middle BAT+
Black →
Middle BAT−
If the system has a push
button, insert the positive
push button wire into the
empty position of the 3-
position splice terminal.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Install AI Harness
Blue
(EXT1)
(PBS+)
Violet and
red (splice
terminal
• Align ends of heatshrink on both harnesses near end of
sheet metal tab.
10
• Cable tie around both harnesses and sheet metal tab.
APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE
Red
Red
(BAT+)
E/F Series
Black
(BAT−)
Page 11