Carmanah R829-F Manuel d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Carmanah R829-F. Carmanah R829-F 20 pages. Traffic beacon
Également pour Carmanah R829-F : Manuel de démarrage rapide (20 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel d'installation (20 pages)
Imprimer la page
3"
Discard
leftover
wire
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Prepare AI Harness
• Obtain AI harness.
• Cut and remove terminals of the five wires shown
2
(violet, blue, black, red and yellow).
• Leave green wire ring terminal intact (not shown).
• Cut yellow wire to same length as black wire.
• Cut a three-inch section of yellow wire and strip each
end 0.35", for use later.
3
• Install provided heat-shrink tubing around the five wires
4.25" from end of black wire (other wires will end up
4
being longer).
• Use heat gun to affix the heat shrink tubing.
5
• Strip insulation of the five wires 0.35".
APPLIED INFORMATION (AI) INTEGRATION INSTALL GUIDE
F Series
4.25"
Page 7