Carmanah R829-F 설치 매뉴얼 - 페이지 7
{카테고리_이름} Carmanah R829-F에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R829-F 20 페이지. Traffic beacon
Carmanah R829-F에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지)
페이지 인쇄
3"
Discard
leftover
wire
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Prepare AI Harness
• Obtain AI harness.
• Cut and remove terminals of the five wires shown
2
(violet, blue, black, red and yellow).
• Leave green wire ring terminal intact (not shown).
• Cut yellow wire to same length as black wire.
• Cut a three-inch section of yellow wire and strip each
end 0.35", for use later.
3
• Install provided heat-shrink tubing around the five wires
4.25" from end of black wire (other wires will end up
4
being longer).
• Use heat gun to affix the heat shrink tubing.
5
• Strip insulation of the five wires 0.35".
APPLIED INFORMATION (AI) INTEGRATION INSTALL GUIDE
F Series
4.25"
Page 7