ANDalyze AND1100 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ANDalyze AND1100. ANDalyze AND1100 16 pages. Fluorimeter for water testing

Imprimer la page

AND1100 Fluorimeter for Water Testing

4.8 InstraComm Lite

This software allows users to launch and record live sample results, download all sample results from the

instrument and perform related configuration tasks. The InstraComm application was developed by

Autonomous Innovations, Inc. and a complimentary "Lite" version has been made available with the purchase

of ANDalyze's AND1100. To download your complimentary version of InstraComm Lite, please visit

andalyze.com and log in to register your device. For additional information and operating instructions see

InstraComm Lite Solutions Notes (Available separately).

5 Site Set‐Up and Management

This section provides information concerning the set‐up and management of Sites. As different sample

locations contain different water characteristics (sample matrix) it is recommended to create a new site for

each sample area. This allows the user to track and compare the results at each location while also normalizes

the results through an on‐site calibration.

5.1 New Site Set‐Up

Sites are important because each water sample contains differences which affect testing results. It is

recommended that each location is site calibrated. So by creating, calibrating and selecting that site in the

future, this calibration can be used repeatedly. Please see the specific Testing and Calibration Manual for

detailed instructions.

To create a new site:

1. Scroll to the "Site" field and

press "Select".

4. If Sensor Lot option is

turned ON, you will

have the option to

enter the lot of the

sensors.

ANDalyze Inc. 800 Boylston Street, Prudential Tower, Floor 16, Boston, MA 02199 USA Tel. +1 857.453.6740 www.andalyze.com

2. Using the up‐down

keys, select "New Site".

5. If the Temperature

option is turned ON,

you will have the

option to enter the

temperature of the

sample water.

Page 11 of 16

3. Enter the name of the location (8

characters max) and press "Save".

July 1, 2013