ANDalyze AND1100 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe ANDalyze AND1100. ANDalyze AND1100 16 stron. Fluorimeter for water testing
Drukuj stronęAND1100 Fluorimeter for Water Testing
4.8 InstraComm Lite
This software allows users to launch and record live sample results, download all sample results from the
instrument and perform related configuration tasks. The InstraComm application was developed by
Autonomous Innovations, Inc. and a complimentary "Lite" version has been made available with the purchase
of ANDalyze's AND1100. To download your complimentary version of InstraComm Lite, please visit
andalyze.com and log in to register your device. For additional information and operating instructions see
InstraComm Lite Solutions Notes (Available separately).
5 Site Set‐Up and Management
This section provides information concerning the set‐up and management of Sites. As different sample
locations contain different water characteristics (sample matrix) it is recommended to create a new site for
each sample area. This allows the user to track and compare the results at each location while also normalizes
the results through an on‐site calibration.
5.1 New Site Set‐Up
Sites are important because each water sample contains differences which affect testing results. It is
recommended that each location is site calibrated. So by creating, calibrating and selecting that site in the
future, this calibration can be used repeatedly. Please see the specific Testing and Calibration Manual for
detailed instructions.
To create a new site:
1. Scroll to the "Site" field and
press "Select".
4. If Sensor Lot option is
turned ON, you will
have the option to
enter the lot of the
sensors.
ANDalyze Inc. 800 Boylston Street, Prudential Tower, Floor 16, Boston, MA 02199 USA Tel. +1 857.453.6740 www.andalyze.com
2. Using the up‐down
keys, select "New Site".
5. If the Temperature
option is turned ON,
you will have the
option to enter the
temperature of the
sample water.
Page 11 of 16
3. Enter the name of the location (8
characters max) and press "Save".
July 1, 2013